Allan Block USA  |  Photos  |  Vidéos  |  Références  |  Contactez  |  Rechercher un Distributeur 

           

Corners with Geogrid

Document imprimable.pdf

Installing Geogrid on Inside 90° Corners

On inside corners additional geogrid is required to extend past the end of the wall, 25% of the completed wall height (H/4).
  • Cut geogrid to required lengths per the approved plan. As a general rule the length of the geogrid needs to extend a minimum of 25% of the wall height past the end of the inside corner.
  • Install the layer of geogrid with the geogrid extending past the inside corner.
  • Alternate the next layer of geogrid to extend the past the inside corner in the opposite direction.
Example:
Finished wall height is 12 ft. (3.7 m), divide by 4 which equals 3 ft. (0.9 m).The length the grid will need to extend past the corner is 3 ft. (0.9 m).

Géogrille avec coins intérieurs à 90°

Installing Geogrid on Outside 90° Corners

Each leg of the wall must be reinforced independent of adjacent wall sections. This will require placement of grid to go up or down a course at the corner.
  • Cut geogrid to required lengths per the approved plans.
  • Install geogrid to the outside corner with the roll direction running back into the excavated site.
  • On the next course of block, lay the next layer of grid perpendicular to the previous layer.



Building Corners
Géogrille avec coins extérieurs à 90°
Twitter Facebook flicker
|  AB International  |  Disclaimer  |

US Patents: #5,484,236, #6,792,731, #6,322742, #6854,236, #7,775,747, #5,623,797, #6,948,282 & #D624,204S
Canada Patents: #2,012,283, #2,133,675, #2,182,321, & #2,432,660
European Patents: #649,714 & #99,308,421.9
Austraila Patents: #682,394, #133,306 & #2003204789 Germany Patents: #69,423,563.6 Japan Patents: #3,142,107
Mexico Patents: #189,846 Taiwan Patents: #NI-72269 International and Other Patents Pending...